Menu
Logo

Wyse D10DP: Hardware 


 


 

 



Wyse D10DP

Size comparison betwee Wyse D-class and Z-class The size of the D class thin client is more in line with the typical sizing of thin clients, and stands some 17cm high compared to the 20cm of the Z class. Correspondingly there is less space inside for those wanting to expand the functionality of their example. A comparison between the two is shown in the photo on the right. (Note: My D10DP came without a foot).

More details of the D-class range can be found here.

D10DP label

My model is a D10DP, part # 909648-02 and was manufactured in October 2013.

Specifications

The basic specs are:

Processor
   Type
   Speed
Dual core AMD G-T48E
1.4GHz
Memory
   Flash
   RAM
  2GB
  2GB (max 4GB)
Video
   Chip
   Max resolution
AMD Radeon HD 6250 Graphics
2560 x 1600 32-bit colour (Display Port)
1920 x 1200 32 bit colour (DVI-I port)
1920x1200 32-bit colour (Dual display)
Ports
   Video
   Network
   USB
   Serial
   Parallel
   PS/2
1 x DVI-I, 1 x Display Port
10/100/1000
4 x USB2.0
0
0
0
Power
   Plug
   Off
   Idle
   Running
Coax 5.5mm/2.5mm
4 W
14W
16W
Dimensions
H x W x D (mm)307 x 82 x 225
NB:. My D10DP came with a 2GB SATA flash drive. Currently (March 2017) they are being shipped with 8GB SATA flash drives.

Operating system: Wyse Thin OS with PCoIP.

For others in the range see the table on the D Class

Power Supply

No power supply came with this so I used a 19V 3.42A Delta Electronics PSU. Note: The 19V rating. If, like me, you have a number of PSUs and thin clients floating around you need to mark this PSU clearly in some way. I'm sure that those which run from 12V - which is most of them - would not take too kindly to 19V. The coax plug is 5.5mm/2.5mm. When I took the power measurements I found this particular PSU seems to take a standing 4W before it is even plugged into the D10DP.

Getting Inside

This is fairly straightforward. You need to remove the foot (if fitted) and then the three screws on the back panel. The plastic side cover then slides back a short way can be lifted off. This reveals a metal shield that is dealt with in a similar fashion. This time there are screws in each corner to be removed and a final one in the centre of the edge by the front panel. Once again this panel is slid a short distance towards the rear before it can be lifted clear. (There are three metal lugs each side that locate in small slots in the metal chassis that lock it in place). The speaker is fixed to this panel and will need to be disconnected from the board near to the SODIMM.

CPU

For those to whom it matters here is some detail from Linux's /proc/cpuinfo. (Dual Core Processor)

vendor_id:AuthenticAMD
cpu family:20
model:2
model name:AMD G-T48E Processor
stepping:0
flags:fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock nrip_save pausefilter vmmcall

PCI

The output from the linux lspci command:

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6250]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Expansion

Dell Wyse D10DP internal view Click on the photo for a larger version.

The Flash memory in the D10DP is easily replaceable. However the RAM has an obstacle in the way.

Flash: The flash is a small horizontal SATA DOM which can be seen top-middle in the photograph. There are no other SATA sockets on the board.

RAM: The RAM is a 204-pin DDR3 SODIMM can be seen bottom-left in the photograph. The one fitted is a Hynix part: HMT425S6AFR6C-PB NO AA and is labelled 2GB 1Rx16 PC3-12800S-11-12-C3. The maximum RAM capacity is 4GB according to the D-class brochure.

The SODIMM socket is located just behind the front panel BUT is tucked under the edge of the circuit board that carries the front panel on/off switch and USB ports. It looks like you'll need to take this off if you decide to upgrade the RAM.

mPCIe: There is a mPCIe socket adjacent to the SATA socket. I assume this is for a wireless module.

There are a few other connectors dotted around the circuit board that I don't know the purpose of.

CN7700. This socket is on the edge of the board by the SATA socket. It's 5-pin strip but the voltages on it aren't right for a standard USB port.

CN4400. A Link. For what?

I haven't taken the motherboard out of the housing, but I did notice whilst peering in through the ventilation slots, a push switch mounted on the rear of the board. Nearby to this is the word 'BIOS'. Once again I have no idea what this switch does.

Additional photos

D10DP SATA module
The flash and the mPCIe socket.
D10DP RAM
The SODIMM RAM tucked under...
Mysterious  button
Mysterious button on the back.

 


Any comments? email me. Added March 2017